How Does The Engine Inhale And Exhaust?
Sep 09, 2023
The intake and exhaust systems are usually considered as interconnected systems. On the one hand, the gas passes through the entire system successively in the form of fresh air and exhaust gas; On the other hand, certain engine systems have inherent connections (such as turbochargers). The intake system is responsible for providing fresh air to the engine (as shown in the figure), while the exhaust system is responsible for "transporting" combustion waste gas.
Engine intake
The intake valve we see is generally larger than the exhaust valve, because the intake is usually sucked in by vacuum, while the exhaust is pushed out by compression, making exhaust easier compared to intake. In order to obtain more fresh air for combustion, the intake valve needs to be larger to obtain more intake air.
The working principle of a four stroke engine is as follows.
① Intake stroke: During the intake process, the intake valve opens and the exhaust valve closes. The piston moves from the top dead center of the cylinder to the bottom dead center, and the volume of the cylinder above the piston increases, resulting in a decrease in pressure inside the cylinder. When the pressure drops below atmospheric pressure, a vacuum suction is formed in the cylinder, and the combustible mixture is sucked into the cylinder through the intake valve.
Engine intake stroke
② Compression stroke: During the compression process, both the intake and exhaust valves are closed, and the piston moves from the bottom dead center to the top dead center to compress the combustible mixture, reducing its volume, increasing its density, and increasing its temperature. When the piston reaches the top dead center, compression is completed, and the mixture is compressed into the combustion chamber.
Engine compression stroke
③ Work stroke: During the work process, the intake and exhaust valves remain closed. When the piston approaches the compression top dead center, the spark plug installed on the cylinder block emits an electric spark, igniting the compressed combustible mixture. After the combustion of the combustible mixture, the high-temperature and high-pressure gas drives the piston to move rapidly from top dead center to bottom dead center, causing the crankshaft to rotate and output mechanical energy through the connecting rod.
Engine power stroke
④ Exhaust stroke: During the exhaust process, the exhaust valve opens and the intake valve closes. The piston moves from bottom dead center to top dead center, forcing exhaust gas out of the cylinder for the next working cycle.
Engine exhaust stroke
The intake system consists of an air filter, air flow meter, intake pressure sensor, throttle body, additional air valve, idle control valve, resonance chamber, power chamber, intake manifold, etc.
The main function of the intake system is to deliver clean, dry, sufficient and stable air to the engine to meet its needs, and to prevent impurities and large particles of dust from entering the engine combustion chamber, causing abnormal engine wear. Another important function of the intake system is to reduce noise. The intake noise not only affects the overall vehicle noise, but also affects the interior noise, which has a significant impact on ride comfort. The design of the intake system directly affects the power and noise quality of the engine, and is related to the overall ride comfort of the vehicle.
Engine intake route
When the engine is working, the driver controls the throttle opening through the accelerator pedal to change the intake volume and control the engine's operation. The air entering the engine is filtered out of impurities such as dust through the air filter, then flows through the air flow meter, enters the power chamber along the throttle channel, and is distributed to various cylinders through the intake manifold; When the engine is idling at cold speed, some of the air enters the cylinder through the additional air valve or idle control valve, bypassing the throttle valve.
The exhaust system refers to the system that collects and emits exhaust gas, including the exhaust manifold, exhaust pipe, muffler, and tailpipe.
After the mixture of fresh air and gasoline enters the engine for combustion, a high-temperature and high-pressure gas is generated to push the piston. When the gas energy is released, it is no longer valuable to the engine, and these gases become exhaust gases and are discharged out of the engine. After the exhaust gas is discharged from the cylinder, it immediately enters the exhaust manifold. After the exhaust manifolds of each cylinder gather, the exhaust gas is discharged through the exhaust pipe. Like the intake manifold, gases leave the engine in a pulse manner inside the exhaust manifold, so the length and curvature of the exhaust manifolds for each cylinder should also be designed to be as same as possible, so that the exhaust of each cylinder is equally smooth.







